Alemite Alemlube Alemite Gladiator Rotary Drum Pump 18L/Min - 501A
Make 4 payments of $44.50 over 8 weeks and get it now!
Warehouse Stock Levels
Enter your qty and post code to calculate
The 501A rotary drum pump is suitable for the transfer of oil, diesel and petrol from 60L and 205L drums and bulk tanks.
The Gladiator 501A rotary drum pumps vanes make it also suitable for the transfer of diesel fuel, unleaded and leaded petrol.
The Gladiator 501A comes complete with 2.2 metres of anti static fuel hose, spout, spout holster and 2” BSP bung adaptor & delivers
approximately 18 L/min or 0.26L per rotation when pumping diesel fuel.
|Uses||Diesel, petrols, kerosene, lube oil and machine oil|
|Discharge Quantity||Approximately 70 turns / 18 L/min|
|Materials||Body hardened aluminum alloy; Handle - aluminum die cast; Seal - Buna N; Hose–anti static fuel hose|
|Weight/length||3.6 kg/1300mm (4.3ft)|
|Size||Suction Tube: 31.8mm (1¼”) OD Delivery Hose: 19.05mm (3/4”) ID x 2.2m|
Mount handle assembly (501A-9 & 501A-10) to the pump body (501A-1) with the aid of bolt (501A-18). Connect the outlet tube (501A-12) & the bung (501A-15) and then screw suction tube (501A-16) together with adaptor (501A-25) into the inlet of pump body.
When assembling pump & tubes, please ensure that all threads are completely airtight (use thread tape) otherwise the pump will not prime. Test prime by putting your hand over the bottom of the pump body inlet hole, turn handle in a clockwise direction. If you feel a strong suction on the palm of your hand the pump is operating correctly and is now ready to mount into the drum. If not, add a few drops of oil through the inlet hole and turn handle to lubricate internals. If pumping fuels and the pump does not prime, lubricate pump body with some oil via the pump inlet. This may be performed as required if using petrol which can dry out the vanes inside reducing suction & priming.
When using as a siphon pump
Turn the handle 5 or 6 times. When the liquid begins to flow from the outlet, place handle at a horizontal direction.
If the liquid stops being transferred flowing, move the handle slightly.
After use, fix the handle to the indicated point. Then the liquid inside the pump can now flow back into the drum.
Siphoning will not work when pumping liquid of a high viscosity. The pump will not siphon successfully unless all hose and pump joints are fully tightened up and all connection points are completely airtight.
Do not use this pump for transferring solvents, strong alkalis or acids as the pumps seals and gaskets are incompatible with aggressive solutions.
|Type||Fluid Transfer Pump|
Free delivery applies to orders with a value over $100 (Including GST), however, some are excluded as follows:
- Orders with items that are deemed bulky, large or heavy. (EG: 20KG Oil Drum, Compressors, Welders, long drawer slides, etc…)
- Orders with items that are deemed as dangerous (Aerosol, Flammable products, etc...)
- Locations that are deemed as remote or rural by TNT or Australia Post. Your Shipping fee can be calculated on product pages and it will be charged at checkout.
For standard and express delivery, typically your order will get processed up to 3 business days before dispatch. In some instances, there can be a slight delay due to a high volume of orders. Once the parcel is in the courier's hands, it is out of our control. Parcels going from VIC to non-Metro for standard and express might take slightly longer. If you request something by a certain day, please contact us via E-mail or call before you place the order.
Pick up in Store:
Click and Collect is available Monday to Friday (8am to 5pm)
You will be contacted by the warehouse to inform you when your order is ready for collection. Your order will not be ready for collection until notified by our warehouse.
If you require an urgent pick up. Please contact us via email or phone so this can be arranged.
Be The First To Review This Product!
Help other Revolution Industrial users shop smarter by writing reviews for products you have purchased.